SSD not showing up in bios fix it

An SSD is one of the most important components in a computer, but it may not show up in BIOS. If you’re experiencing any issues with your drive and want to check if it’s present, here are some steps you can take:

  • Test for power by verifying that the cable is properly connected and there isn’t a loose connection or broken wire.
  • Check for physical damage by looking at all sides of the drive and testing for any signs of wear and tear.
  • Make sure that your motherboard supports SATA 3 (SATA 2 will work too).
  • Make sure there aren’t any jumpers on the back labeled ‘IDE’.

The bios SSD issue is a common problem that sometimes happens with bios on a new system or bios update. In most cases, the bios SSD not showing in bios occurs after upgrading bios from the default version to the latest version.

Bios not detecting ssd

When this issue appears?

If your bios ssd still not showing even though you upgrade bios, then probably your computer is using AHCI mode instead of IDE.

Many people have an older hard drive and a newer solid-state drive, they may want to boot from their SSD as opposed to their HDD.

However, they will often come across a problem where the BIOS does not detect any sort of SSD or it simply does not show up at all.

How it can be fixed?

  • First try updating the bios to the latest bios version.
  • f that doesn’t work, set AHCI mode in bios (not RAID).

Reasons:  If you’re trying to boot from your SSD and it doesn’t show up then there are a few things that you should check before assuming anything else.

First, try making sure that your bios SSD is actually supported by the motherboard and bios it’s installed on if it isn’t then there’s no point in continuing since you won’t be able to get it working.

If this bio SSD is supported and is compatible with your bios setup but you still can’t get it working then another option might be changing the bios settings. The first thing that you should go to is set ‘SATA Operation’ to ‘AHCI’. This bio should be turned on by default, but sometimes bios developers have a tendency to leave these settings off so it’s best to check if you’re unsure.

You should also make sure that your BIOS isn’t in SATA mode ID or IDE mode operation. If it is then try switching between the modes until bios SSD appears again.

Ryan MacWha

I am Ryan! I write about performance-driven and reliable SSDs. I can save your time in decision-making. How about you?